LS-WVL新手改机后TR无法启动原因咨询 1.64MOD1
本帖最后由 bennysx 于 2013-1-20 16:43 编辑参照论坛各位大神教程改机 刷1.64Mod1固件，按照才做进行改机后发现TR无法启动~！折腾很久不知道原因哪里，请教各位高手给予指点~！
贴上改机信息及相关数据~！
====================================================================
【win7 CMD命令下操作：】
Microsoft Windows [版本 6.1.7601]
版权所有 (c) 2009 Microsoft Corporation。保留所有权利。
C:\Users\Administrator>d:
D:\>java -jar acp_commander.jar -t 192.168.1.106 -ip 192.168.1.106 -pw password
-s
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Using random connID value = F099AEA34052
Using target: 192.168.1.106/192.168.1.106
Starting authentication procedure...
Sending Discover packet...
Found:Nas (/192.168.1.106) LS-WVL(KOUGYOKU) (ID=00488) mac: 10:6F:3F:A8
:21:FCFirmware=1.640 Key=0C24C04E
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_OK
Enter telnet commands to LS, enter 'exit' to leave
/root>echo -e "**********\n**********" | passwd
OK (ACP_STATE_OK)
>exit
Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.
D:\>java -jar acp_commander.jar -t 192.168.1.106 -ip 192.168.1.106 -pw password
-c "sed -i 's/UsePAM yes/UsePAM no/g' /etc/sshd_config"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Using random connID value = DC10B10E342C
Using target: 192.168.1.106/192.168.1.106
Starting authentication procedure...
Sending Discover packet...
Found:Nas (/192.168.1.106) LS-WVL(KOUGYOKU) (ID=00488) mac: 10:6F:3F:A8
:21:FCFirmware=1.640 Key=001BF896
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_OK
>sed -i 's/UsePAM yes/UsePAM no/g' /etc/sshd_config
OK (ACP_STATE_OK)
Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.
D:\>java -jar acp_commander.jar -t 192.168.1.106 -ip 192.168.1.106 -pw password
-c "sed -i 's/PermitRootLogin no/PermitRootLogin yes/g' /etc/sshd_config"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Using random connID value = 7C3CC56C5A35
Using target: 192.168.1.106/192.168.1.106
Starting authentication procedure...
Sending Discover packet...
Found:Nas (/192.168.1.106) LS-WVL(KOUGYOKU) (ID=00488) mac: 10:6F:3F:A8
:21:FCFirmware=1.640 Key=66179100
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_OK
>sed -i 's/PermitRootLogin no/PermitRootLogin yes/g' /etc/sshd_config
OK (ACP_STATE_OK)
Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.
D:\>java -jar acp_commander.jar -t 192.168.1.106 -ip 192.168.1.106 -pw password
-c "/etc/init.d/sshd.sh restart"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Using random connID value = 97EBBB1A93C4
Using target: 192.168.1.106/192.168.1.106
Starting authentication procedure...
Sending Discover packet...
Found:Nas (/192.168.1.106) LS-WVL(KOUGYOKU) (ID=00488) mac: 10:6F:3F:A8
:21:FCFirmware=1.640 Key=5509E149
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_OK
>/etc/init.d/sshd.sh restart
load_info ItemValue = off
LoadConfFileStringEx:key= not found in /etc/melco/info.
LoadConfFileOnOffEx:key= not found in /etc/melco/info.
LoadConfFileStringEx:key= not found in /etc/melco/diskinfo.
LoadConfFileStringEx:key= not found in /etc/melco/diskinfo.
LoadConfFileStringEx:key= not found in /etc/melco/diskinfo.
file:/etc/sftponly_config
userinfo finished
groupname admin
groupname guest
groupname hdusers
file:/etc/pam.d/sshd
Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.
D:\>
===================================================================
【CRT下的改机过程】
BUFFALO INC. LinkStation series
Nas login: root
Password:
Last login: Sun Jan 20 08:12:37 GMT 2013 on pts/0
root@Nas:~# su
bash-3.2# mkdir /mnt/share/tmp
mkdir: cannot create directory '/mnt/share/tmp': No such file or directory
bash-3.2# cd /mnt/share/tmp/
bash: cd: /mnt/share/tmp/: No such file or directory
<are/cs05q3armel/cross/stable/teraprov2-bootstrap_1.2-7_arm.xsh
sh ./teraprov2-bootstrap_1.2-7_arm.xsh--2013-01-20 08:13:06--http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/teraprov2-bootstrap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... 140.211.169.161
Connecting to ipkg.nslu2-linux.org|140.211.169.161|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 251212 (245K)
Saving to: `teraprov2-bootstrap_1.2-7_arm.xsh'
100%[======================================>] 251,212 34.1K/s in 7.5s
2013-01-20 08:13:15 (32.9 KB/s) - `teraprov2-bootstrap_1.2-7_arm.xsh' saved
bash-3.2# sh ./teraprov2-bootstrap_1.2-7_arm.xsh
Optware Bootstrap for teraprov2.
Extracting archive... please wait
bootstrap/
bootstrap/bootstrap.sh
bootstrap/ipkg-opt.ipk
bootstrap/ipkg.sh
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
1224+1 records in
1224+1 records out
Creating temporary ipkg repository...
Installing optware-bootstrap package...
Unpacking optware-bootstrap.ipk...Done.
Configuring optware-bootstrap.ipk...Modifying /etc/init.d/rcS
Done.
Installing ipkg...
Unpacking ipkg-opt.ipk...Done.
Configuring ipkg-opt.ipk...Done.
Removing temporary ipkg repository...
Installing wget...
Installing wget (1.12-2) to root...
Configuring wget
Successfully terminated.
Creating /opt/etc/ipkg/cross-feed.conf...
Setup complete.
root@Nas:~# ipkg update
ipkg upgrade
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages.gz
ipkg install openssh
ipkg install nanoInflating http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages.gz
Updated list of available packages in /opt/lib/ipkg/lists/cross
Successfully terminated.
root@Nas:~# ipkg upgrade
Nothing to be done
Successfully terminated.
root@Nas:~# ipkg install openssh
Installing openssh (5.9p1-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/openssh_5.9p1-1_arm.ipk
Installing openssl (0.9.7m-6) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/openssl_0.9.7m-6_arm.ipk
Installing zlib (1.2.5-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/zlib_1.2.5-1_arm.ipk
Configuring openssh
update-alternatives: Linking //opt/bin/scp to /opt/bin/openssh-scp
update-alternatives: Linking //opt/bin/ssh to /opt/bin/openssh-ssh
Generating RSA Key...
Generating public/private rsa1 key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_key.pub.
The key fingerprint is:
a1:5c:c1:f0:6b:04:40:7e:2f:7f:23:26:3c:17:18:9f
The key's randomart image is:
+------+
| .o.oo. |
| . o.. |
| . o = |
| o O + |
| = E |
| . + . |
| + = o |
| = o . |
| |
+-----------------+
Generating RSA Key...
Generating public/private rsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_rsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_rsa_key.pub.
The key fingerprint is:
e9:3d:2c:12:41:18:3e:29:96:f7:12:c9:ff:8f:0c:50
The key's randomart image is:
+--[ RSA 2048]----+
| .o. |
| +.+ |
|+ O E |
| . o * . . |
| o + S |
| o + o |
| o + + |
| + + . |
| o . |
+-----------------+
Generating DSA Key...
Generating public/private dsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_dsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_dsa_key.pub.
The key fingerprint is:
c2:32:ee:ad:68:e7:ea:b5:1a:69:1c:2a:d2:fd:55:72
The key's randomart image is:
+--[ DSA 1024]----+
| |
| |
| |
| . |
|. o o S E |
| + = o . + |
|+ * + . |
|o..=.+ . |
| o===.o |
+-----------------+
Fixing permissions on the /tmp directory...
/opt/sbin/sshd: no process killed
Configuring openssl
Configuring zlib
Successfully terminated.
root@Nas:~# ipkg install nano
Installing nano (2.2.6-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/nano_2.2.6-1_arm.ipk
Installing ncurses (5.7-3) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/ncurses_5.7-3_arm.ipk
Configuring nano
Configuring ncurses
update-alternatives: Linking //opt/bin/clear to /opt/bin/ncurses-clear
Successfully terminated.
root@Nas:~# cd /opt/etc/openssh/
root@Nas:/opt/etc/openssh# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@Nas:/opt/etc/openssh# exit
logout
bash-3.2# exit
exit
root@Nas:~# cd /mnt/array1/tmp/
-bash: cd: /mnt/array1/tmp/: No such file or directory
root@Nas:~# reboot
root@Nas:~#
Message from syslogd@Nas at Sun Jan 20 08:18:12 2013 ...
Nas clientUtil_server: ap_serv_exit() exit ap_servd. code=15
BUFFALO INC. LinkStation series
Nas login: root
Password:
Last login: Sun Jan 20 08:12:37 GMT 2013 on pts/0
Last login: Sun Jan 20 08:21:03 GMT 2013 on pts/0
root@Nas:~# cd /mnt/array1/tmp/
-bash: cd: /mnt/array1/tmp/: No such file or directory
root@Nas:~# ipkg install transmission
transmission-daemon -fInstalling transmission (2.73-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/transmission_2.73-1_arm.ipk
Installing libcurl (7.24.0-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/libcurl_7.24.0-1_arm.ipk
Installing libevent (2.0.20-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/libevent_2.0.20-1_arm.ipk
Configuring libcurl
Configuring libevent
Configuring transmission
Successfully terminated.
root@Nas:~# transmission-daemon -f
Transmission 2.73 (13592) started (session.c:720)
RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:803)
RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:997)
RPC Server Whitelist enabled (rpc-server.c:1001)
UDP Failed to set receive buffer: requested 4194304, got 327680 (tr-udp.c:77)
UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:82)
UDP Failed to set send buffer: requested 1048576, got 327680 (tr-udp.c:88)
UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:93)
DHT Generating new id (tr-dht.c:309)
Using settings from "/root/.config/transmission-daemon" (daemon.c:517)
Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.1.1:1900/ipc" (upnp.c:202)
Port Forwarding (UPnP) Local Address is "192.168.1.106" (upnp.c:204)
Port Forwarding (UPnP) Port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.1.106:51413) (upnp.c:279)
Port Forwarding (UPnP) Port forwarding successful! (upnp.c:282)
Port Forwarding State changed from "Not forwarded" to "Forwarded" (port-forwarding.c:93)
DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
^C Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
DHT Not saving nodes, DHT not ready (tr-dht.c:356)
Port Forwarding Stopped (port-forwarding.c:181)
Port Forwarding (UPnP) Stopping port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1" (upnp.c:245)
Port Forwarding State changed from "Forwarded" to "Not forwarded" (port-forwarding.c:93)
Closing transmission session... done.
root@Nas:~# ========================================================
【CRT下的改机过程】
BUFFALO INC. LinkStation series
Nas login: root
Password:
Last login: Sun Jan 20 08:12:37 GMT 2013 on pts/0
root@Nas:~# su
bash-3.2# mkdir /mnt/share/tmp
mkdir: cannot create directory '/mnt/share/tmp': No such file or directory
bash-3.2# cd /mnt/share/tmp/
bash: cd: /mnt/share/tmp/: No such file or directory
<are/cs05q3armel/cross/stable/teraprov2-bootstrap_1.2-7_arm.xsh
sh ./teraprov2-bootstrap_1.2-7_arm.xsh--2013-01-20 08:13:06--http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/teraprov2-bootstrap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... 140.211.169.161
Connecting to ipkg.nslu2-linux.org|140.211.169.161|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 251212 (245K)
Saving to: `teraprov2-bootstrap_1.2-7_arm.xsh'
100%[======================================>] 251,212 34.1K/s in 7.5s
2013-01-20 08:13:15 (32.9 KB/s) - `teraprov2-bootstrap_1.2-7_arm.xsh' saved
bash-3.2# sh ./teraprov2-bootstrap_1.2-7_arm.xsh
Optware Bootstrap for teraprov2.
Extracting archive... please wait
bootstrap/
bootstrap/bootstrap.sh
bootstrap/ipkg-opt.ipk
bootstrap/ipkg.sh
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
1224+1 records in
1224+1 records out
Creating temporary ipkg repository...
Installing optware-bootstrap package...
Unpacking optware-bootstrap.ipk...Done.
Configuring optware-bootstrap.ipk...Modifying /etc/init.d/rcS
Done.
Installing ipkg...
Unpacking ipkg-opt.ipk...Done.
Configuring ipkg-opt.ipk...Done.
Removing temporary ipkg repository...
Installing wget...
Installing wget (1.12-2) to root...
Configuring wget
Successfully terminated.
Creating /opt/etc/ipkg/cross-feed.conf...
Setup complete.
root@Nas:~# ipkg update
ipkg upgrade
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages.gz
ipkg install openssh
ipkg install nanoInflating http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages.gz
Updated list of available packages in /opt/lib/ipkg/lists/cross
Successfully terminated.
root@Nas:~# ipkg upgrade
Nothing to be done
Successfully terminated.
root@Nas:~# ipkg install openssh
Installing openssh (5.9p1-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/openssh_5.9p1-1_arm.ipk
Installing openssl (0.9.7m-6) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/openssl_0.9.7m-6_arm.ipk
Installing zlib (1.2.5-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/zlib_1.2.5-1_arm.ipk
Configuring openssh
update-alternatives: Linking //opt/bin/scp to /opt/bin/openssh-scp
update-alternatives: Linking //opt/bin/ssh to /opt/bin/openssh-ssh
Generating RSA Key...
Generating public/private rsa1 key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_key.pub.
The key fingerprint is:
a1:5c:c1:f0:6b:04:40:7e:2f:7f:23:26:3c:17:18:9f
The key's randomart image is:
+------+
| .o.oo. |
| . o.. |
| . o = |
| o O + |
| = E |
| . + . |
| + = o |
| = o . |
| |
+-----------------+
Generating RSA Key...
Generating public/private rsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_rsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_rsa_key.pub.
The key fingerprint is:
e9:3d:2c:12:41:18:3e:29:96:f7:12:c9:ff:8f:0c:50
The key's randomart image is:
+--[ RSA 2048]----+
| .o. |
| +.+ |
|+ O E |
| . o * . . |
| o + S |
| o + o |
| o + + |
| + + . |
| o . |
+-----------------+
Generating DSA Key...
Generating public/private dsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_dsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_dsa_key.pub.
The key fingerprint is:
c2:32:ee:ad:68:e7:ea:b5:1a:69:1c:2a:d2:fd:55:72
The key's randomart image is:
+--[ DSA 1024]----+
| |
| |
| |
| . |
|. o o S E |
| + = o . + |
|+ * + . |
|o..=.+ . |
| o===.o |
+-----------------+
Fixing permissions on the /tmp directory...
/opt/sbin/sshd: no process killed
Configuring openssl
Configuring zlib
Successfully terminated.
root@Nas:~# ipkg install nano
Installing nano (2.2.6-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/nano_2.2.6-1_arm.ipk
Installing ncurses (5.7-3) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/ncurses_5.7-3_arm.ipk
Configuring nano
Configuring ncurses
update-alternatives: Linking //opt/bin/clear to /opt/bin/ncurses-clear
Successfully terminated.
root@Nas:~# cd /opt/etc/openssh/
root@Nas:/opt/etc/openssh# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@Nas:/opt/etc/openssh# exit
logout
bash-3.2# exit
exit
root@Nas:~# cd /mnt/array1/tmp/
-bash: cd: /mnt/array1/tmp/: No such file or directory
root@Nas:~# reboot
root@Nas:~#
Message from syslogd@Nas at Sun Jan 20 08:18:12 2013 ...
Nas clientUtil_server: ap_serv_exit() exit ap_servd. code=15
BUFFALO INC. LinkStation series
Nas login: root
Password:
Last login: Sun Jan 20 08:12:37 GMT 2013 on pts/0
Last login: Sun Jan 20 08:21:03 GMT 2013 on pts/0
root@Nas:~# cd /mnt/array1/tmp/
-bash: cd: /mnt/array1/tmp/: No such file or directory
root@Nas:~# ipkg install transmission
transmission-daemon -fInstalling transmission (2.73-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/transmission_2.73-1_arm.ipk
Installing libcurl (7.24.0-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/libcurl_7.24.0-1_arm.ipk
Installing libevent (2.0.20-1) to root...
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/libevent_2.0.20-1_arm.ipk
Configuring libcurl
Configuring libevent
Configuring transmission
Successfully terminated.
root@Nas:~# transmission-daemon -f
Transmission 2.73 (13592) started (session.c:720)
RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:803)
RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:997)
RPC Server Whitelist enabled (rpc-server.c:1001)
UDP Failed to set receive buffer: requested 4194304, got 327680 (tr-udp.c:77)
UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:82)
UDP Failed to set send buffer: requested 1048576, got 327680 (tr-udp.c:88)
UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:93)
DHT Generating new id (tr-dht.c:309)
Using settings from "/root/.config/transmission-daemon" (daemon.c:517)
Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.1.1:1900/ipc" (upnp.c:202)
Port Forwarding (UPnP) Local Address is "192.168.1.106" (upnp.c:204)
Port Forwarding (UPnP) Port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.1.106:51413) (upnp.c:279)
Port Forwarding (UPnP) Port forwarding successful! (upnp.c:282)
Port Forwarding State changed from "Not forwarded" to "Forwarded" (port-forwarding.c:93)
DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
^C Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
DHT Not saving nodes, DHT not ready (tr-dht.c:356)
Port Forwarding Stopped (port-forwarding.c:181)
Port Forwarding (UPnP) Stopping port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1" (upnp.c:245)
Port Forwarding State changed from "Forwarded" to "Not forwarded" (port-forwarding.c:93)
Closing transmission session... done.
root@Nas:~# 本帖最后由 bennysx 于 2013-1-20 16:34 编辑
到这步后 reboot 机器。
(port-forwarding.c:93)
Closing transmission session... done.
root@Nas:~# reboot
root@Nas:~# settings.json 设置
{
"alt-speed-down": 50,
"alt-speed-enabled": false,
"alt-speed-time-begin": 540,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": false,
"alt-speed-time-end": 1020,
"alt-speed-up": 50,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": false,
"blocklist-url": "http://www.example.com/blocklist",
"cache-size-mb": 4,
"dht-enabled": true,
"download-dir": "/mnt/disk1/share/Downloads",
"download-queue-enabled": true,
"download-queue-size": 5,
"encryption": 1,
"idle-seeding-limit": 30,
"idle-seeding-limit-enabled": false,
"incomplete-dir": "/mnt/disk1/share/Downloads/incomplete ",
"incomplete-dir-enabled": false,
"lpd-enabled": false,
"message-level": 2,
"peer-congestion-algorithm": "",
"peer-limit-global": 240,
"peer-limit-per-torrent": 60,
"peer-port": 51413,
"peer-port-random-high": 65535,
"peer-port-random-low": 49152,
"peer-port-random-on-start": false,
"peer-socket-tos": "default",
"pex-enabled": false,
"port-forwarding-enabled": true,
"preallocation": 1,
"prefetch-enabled": 1,
"queue-stalled-enabled": true,
"queue-stalled-minutes": 30,
"ratio-limit": 2,
"ratio-limit-enabled": false,
"rename-partial-files": true,
"rpc-authentication-required": false,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "{82bd491ba7b25b5c8028231e236754f9e088ee0f8tPVws3T",
"rpc-port": 9091,
"rpc-url": "/transmission/",
"rpc-username": "",
"rpc-whitelist": "*.*.*.*",
"rpc-whitelist-enabled": true,
"scrape-paused-torrents-enabled": true,
"script-torrent-done-enabled": false,
"script-torrent-done-filename": "",
"seed-queue-enabled": false,
"seed-queue-size": 10,
"speed-limit-down": 100,
"speed-limit-down-enabled": false,
"speed-limit-up": 100,
"speed-limit-up-enabled": false,
"start-added-torrents": true,
"trash-original-torrent-files": false,
"umask": 18,
"upload-slots-per-torrent": 14,
"utp-enabled": true
}
windows防火墙处于关闭状态~！ Tr安装看来没有问题了，
先确定重启后NAS中transmission是否在后台运行，可用top命令看 我也是这情况，求解 宿醉冇醒 发表于 2013-1-20 19:07 static/image/common/back.gif
Tr安装看来没有问题了，
先确定重启后NAS中transmission是否在后台运行，可用top命令看 ...
求教 如何查看 在crt窗口中运行top命令查看么？
bennysx 发表于 2013-1-20 20:25 static/image/common/back.gif
求教 如何查看 在crt窗口中运行top命令查看么？
是的
可以看到有transmission就可以确定了
要是有就看remote本地设置-servers setting
你试试把配置文件中"port-forwarding-enabled": true,换成"port-forwarding-enabled": false,再启动transmission 1.如果你刷了1.64 MOD1，那么那几个Java命令就不用输入了。直接用putty或者crt进入telnet或者ssh开始进一步改机；
2.一般mkdir都是针对disk1或者array1下面的share目录的，你直接输入的是mkdir /mnt/share/tmp系统已经提示你出现错误mkdir: cannot create directory '/mnt/share/tmp': No such file or directory3.你可以参考http://leo.eool.net/blog/archives/952这里的帖子，因为你和他的选择一致，我个人也是大量参考他的帖子。
4.如果你使用了阵列，那么注意http://www.gebi1.com/forum.php?mod=viewthread&tid=27060里面的提示，命令不要搞错。 本帖最后由 bennysx 于 2013-1-20 23:08 编辑
CHNine 发表于 2013-1-20 22:58 static/image/common/back.gif
1.如果你刷了1.64 MOD1，那么那几个Java命令就不用输入了。直接用putty或者crt进入telnet或者ssh开始进一步 ...
好的 感谢指正 等下再试试看！~LEO的分享也看过很多遍，不过本人菜鸟一名很多东西搞不太明白~！ 我也是这个问题，用9091打不开，前面的改机也没出现什么问题 我用top命令看了一下，列表里没有transission任务
请问怎么运行 好了，输入transmission-daemon启动
再输入top查询有了，用WEB方式进入，文字都重叠在一起了 bjdxf 发表于 2013-1-20 23:27 static/image/common/back.gif
好了，输入transmission-daemon启动
再输入top查询有了，用WEB方式进入，文字都重叠在一起了 ...
详细的操作步骤来一套吧~！哈哈{:3_64:} 重装了N遍了，这次等时间在久一些，但愿一次性搞定它~！
页:
[1]
2