transmission 2.77挂在ls-wvl上怎样设置单任务下载（已解决）
本帖最后由 holybody 于 2013-3-16 13:32 编辑transmission 2.77挂在ls-wvl上怎样设置单任务下载，我的意思是说在1个任务下载完后另一个任务自动下载
我的配置
{
"alt-speed-down": 1000000,
"alt-speed-enabled": false,
"alt-speed-time-begin": 540,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": false,
"alt-speed-time-end": 1020,
"alt-speed-up": 102400,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": false,
"blocklist-url": "http://www.example.com/blocklist",
"cache-size-mb": 4,
"dht-enabled": true,
"download-dir": "/mnt/array1/share/Downloads/\u7535\u5f71",
"download-queue-enabled": true,
"download-queue-size": 5,
"encryption": 1,
"idle-seeding-limit": 30,
"idle-seeding-limit-enabled": false,
"incomplete-dir": "/mnt/array1/share/Downloads/\u7535\u5f71",
"incomplete-dir-enabled": false,
"lpd-enabled": false,
"message-level": 2,
"peer-congestion-algorithm": "",
"peer-limit-global": 240,
"peer-limit-per-torrent": 60,
"peer-port": 51413,
"peer-port-random-high": 65535,
"peer-port-random-low": 49152,
"peer-port-random-on-start": false,
"peer-socket-tos": "default",
"pex-enabled": true,
"port-forwarding-enabled": true,
"preallocation": 1,
"prefetch-enabled": 1,
"queue-stalled-enabled": true,
"queue-stalled-minutes": 30,
"ratio-limit": 2,
"ratio-limit-enabled": false,
"rename-partial-files": true,
"rpc-authentication-required": false,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "{4028d0e7c3d0a0c235c55ee7ac4e14ad8f99cdaeOSn29rE1",
"rpc-port": 9091,
"rpc-url": "/transmission/",
"rpc-username": "",
"rpc-whitelist": "*.*.*.*",
"rpc-whitelist-enabled": true,
"scrape-paused-torrents-enabled": true,
"script-torrent-done-enabled": false,
"script-torrent-done-filename": "",
"seed-queue-enabled": false,
"seed-queue-size": 10,
"speed-limit-down": 0,
"speed-limit-down-enabled": false,
"speed-limit-up": 5000,
"speed-limit-up-enabled": false,
"start-added-torrents": true,
"trash-original-torrent-files": false,
"umask": 18,
"upload-slots-per-torrent": 14,
"utp-enabled": true
}
请高手指教下小弟！！谢谢！
问题的原因是我没有把Transmission的进程关闭导致我修改不了，
登陆root然后输入第一以下的命令
root@LS:~# killall transmission-daemon这里的窗口先不用关，后面还要输入一条命令。
然后用winscp软件登陆nas进入 /.config/transmission-daemon/settings.json 打开配置文件修改 "download-queue-size": 5, 把5改成1，然后保存。
再到root的界面下输入以下的启动命令就大功告成！！
root@LS:~# transmission-daemon
在这里多谢大家的帮忙，谢谢！！
"download-queue-size": 5,
这个改成1。 pp0pp 发表于 2013-3-16 08:55 static/image/common/back.gif
"download-queue-size": 5,
这个改成1。
改了重启后还是不行 holybody 发表于 2013-3-16 12:15 static/image/common/back.gif
改了重启后还是不行
再把你现在的配置放出来看看 {
"alt-speed-down": 1000000,
"alt-speed-enabled": false,
"alt-speed-time-begin": 540,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": false,
"alt-speed-time-end": 1020,
"alt-speed-up": 102400,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": false,
"blocklist-url": "http://www.example.com/blocklist",
"cache-size-mb": 4,
"dht-enabled": true,
"download-dir": "/mnt/array1/share/Downloads/\u7535\u5f71",
"download-queue-enabled": true,
"download-queue-size": 1,
"encryption": 1,
"idle-seeding-limit": 30,
"idle-seeding-limit-enabled": false,
"incomplete-dir": "/mnt/array1/share/Downloads/\u7535\u5f71",
"incomplete-dir-enabled": false,
"lpd-enabled": false,
"message-level": 2,
"peer-congestion-algorithm": "",
"peer-limit-global": 240,
"peer-limit-per-torrent": 60,
"peer-port": 51413,
"peer-port-random-high": 65535,
"peer-port-random-low": 49152,
"peer-port-random-on-start": false,
"peer-socket-tos": "default",
"pex-enabled": true,
"port-forwarding-enabled": true,
"preallocation": 1,
"prefetch-enabled": 1,
"queue-stalled-enabled": true,
"queue-stalled-minutes": 30,
"ratio-limit": 2,
"ratio-limit-enabled": false,
"rename-partial-files": true,
"rpc-authentication-required": false,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "{4028d0e7c3d0a0c235c55ee7ac4e14ad8f99cdaeOSn29rE1",
"rpc-port": 9091,
"rpc-url": "/transmission/",
"rpc-username": "",
"rpc-whitelist": "*.*.*.*",
"rpc-whitelist-enabled": true,
"scrape-paused-torrents-enabled": true,
"script-torrent-done-enabled": false,
"script-torrent-done-filename": "",
"seed-queue-enabled": false,
"seed-queue-size": 10,
"speed-limit-down": 0,
"speed-limit-down-enabled": false,
"speed-limit-up": 5000,
"speed-limit-up-enabled": false,
"start-added-torrents": true,
"trash-original-torrent-files": false,
"umask": 18,
"upload-slots-per-torrent": 14,
"utp-enabled": true
}
没怎么看懂............... 谢谢！！
先学习下。。。。。。
页:
[1]