【问题已经解决】巴法络wvl改机遇到问题了，
本帖最后由 hupisha 于 2013-11-7 16:40 编辑BUFFALO INC. LinkStation series
Nas login: root
Last login: Wed Nov6 14:56:34 GMT 2013 on pts/0
Last login: Wed Nov6 15:14:24 GMT 2013 on pts/0
root@Nas:~# su
bash-3.2# cd /mnt/disk1/tmp
<are/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xsh
--2013-11-06 15:15:15--http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... 140.211.169.161
Connecting to ipkg.nslu2-linux.org|140.211.169.161|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 251199 (245K)
Saving to: `lspro-bootstrap_1.2-7_arm.xsh'
100%[======================================>] 251,199 158K/s in 1.6s
2013-11-06 15:15:17 (158 KB/s) - `lspro-bootstrap_1.2-7_arm.xsh' saved
bash-3.2# sh ./lspro-bootstrap_1.2-7_arm.xsh
Optware Bootstrap for lspro.
Extracting archive... please wait
bootstrap/
bootstrap/bootstrap.sh
bootstrap/ipkg-opt.ipk
1248+1 records in
1248+1 records out
bootstrap/ipkg.sh
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
Backup your configuration settings, then type:
rm -rf /mnt/disk1/.optware
rm -rf /usr/lib/ipkg
This will remove all existing optware packages.
You must *reboot* and then restart the bootstrap script.
root@Nas:/mnt/disk1/tmp/bootstrap# t.
sh: t.: command not found
root@Nas:/mnt/disk1/tmp/bootstrap# root@Nas:/mnt/disk1/tmp/bootstrap# 咋跟教程里面的不一样啊
教程里面的是这样的
http://leo.eool.net/pic/blog/d9fa1acf601e_112B3/image15.png
教程页面：[原创]折腾NAS – Buffalo LS-WVL（二）开箱、改机篇 http://leo.eool.net/blog/archives/952
你曾经安装过ipkg软件，现在它要求你要删除原来的东西后才能再次安装，命令是：rm -rf /mnt/disk1/.optware rm -rf /usr/lib/ipkg pt880 发表于 2013-11-7 00:01
你曾经安装过ipkg软件，现在它要求你要删除原来的东西后才能再次安装，命令是：rm -rf /mnt/disk1/.optware ...
那么我重新刷固件不能够清理这些东西么？谢谢你了伙计 pt880 发表于 2013-11-7 00:01
你曾经安装过ipkg软件，现在它要求你要删除原来的东西后才能再次安装，命令是：rm -rf /mnt/disk1/.optware ...
那么我重新刷固件不能够清理这些东西么？谢谢你了伙计
继续请教，这个刷机建立配置的时候，前面的时间是不是nas设备的时间？
root@Nas:/mnt/disk1/tmp# transmission-daemon -f
Transmission 2.77 (14031) started (session.c:722)
RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:803)
RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:997)
RPC Server Whitelist enabled (rpc-server.c:1001)
UDP Failed to set receive buffer: requested 4194304, got 225280 (tr-udp.c:77)
UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:82)
UDP Failed to set send buffer: requested 1048576, got 225280 (tr-udp.c:88)
UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:93)
DHT Generating new id (tr-dht.c:309)
Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
Using settings from "/root/.config/transmission-daemon" (daemon.c:517)
Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1738)
Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.11.1:54475/ctl/IPConn" (upnp.c:200)
Port Forwarding (UPnP) Local Address is "192.168.11.9" (upnp.c:202)
Port Forwarding (UPnP) Port forwarding through "http://192.168.11.1:54475/ctl/IPConn", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.11.9:51413) (upnp.c:277)
Port Forwarding (UPnP) Port forwarding successful! (upnp.c:280)
Port Forwarding State changed from "Not forwarded" to "Forwarded" (port-forwarding.c:93)
^C Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1738)
DHT Not saving nodes, DHT not ready (tr-dht.c:357)
Port Forwarding Stopped (port-forwarding.c:181)
Port Forwarding (NAT-PMP) readnatpmpresponseorretry succeeded (0) (natpmp.c:72)
Port Forwarding (NAT-PMP) Found public address "112.64.92.127" (natpmp.c:141)
Port Forwarding (UPnP) Stopping port forwarding through "http://192.168.11.1:54475/ctl/IPConn", service "urn:schemas-upnp-org:service:WANIPConnection:1" (upnp.c:243)
Port Forwarding State changed from "Forwarded" to "Not forwarded" (port-forwarding.c:93)
Closing transmission session... done. 呵呵，已经好了，正在恢复原来的下载种子，看来ssh的密码一定要记牢。好恢复啊
学习了，我有个WXL，我也想改。 chenchaopeng 发表于 2013-11-7 18:16
学习了，我有个WXL，我也想改。
改的时候要仔细，，固件下载我这里有
巴法络ls-wvl的两个不同版本号的改机固件MOD下载
http://blog.860530.info/?p=701 進來學習
页:
[1]