[巴法络] Buffalo LS-WXL/LS-QVL等LS系列新手改机攻略,固件1.62以下，Raid均可

同样的问题，困扰几天了，有没有大虾能看看是怎么回事呢？

我和ls一样问题，第一次成功了，现在不行了。。。

好文章，救了亲命了。

我的LS-QVL也一样的问题，/tmp/NFS.log的内容如下：
MOUNTED_PORT=369
Number of instances=3
portmap started
No nfsd fs available.

求高手解答

糟糕！谷歌浏览器无法连接到 192.168.0.102:9091

第一次试通失败。不知道什么原因，先睡了，明天再来折腾。

谢谢楼主教程。

发现下载速度快了，NAS就死机了，大概超过4M/s，机器很容易就死机了。

楼主，你好，我在安装NFS协议的操作时，遇到以下问题，请教一下是何原因，谢谢！

在前2步时都提示正常的，在第3步时，我用WinSCP连上NAS时，在/etc下面也没有发现exports文件，没办法，我只好将附件中的exports文件拷贝到/etc下。



在第4步时，运行命令   1.        exportfs -rv    就有了以下报错。


root@qya-kevin:/# exportfs -rv
exporting *:/mnt/disk1/share
exportfs: can't open /var/lib/nfs/rmtab for reading




第1次运行命令时，提示还有另一个文件不能读。 再次运行命令时，便只有上面的一个文件提示了。

我用WinSCP找到/var/lb/nfs下面，有以下截图:



请帮我看看是何原因，谢谢！

请问楼主，为什么我在安装optware步骤时输入：
wget http://ipkg.nslu2-linux.org/feed ... strap_1.2-7_arm.xsh
的时候，给我的提示为：
--2012-11-10 21:49:33--  http://ipkg.nslu2-linux.org/feed ... strap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... failed: Name or service not known.
wget: unable to resolve host address `ipkg.nslu2-linux.org'
提示名字和服务未知，无法解析主机地址。怎么办呢？？？请楼主帮忙看下，谢谢！

学习，弄了半天重启都没了，查了一下，要：
mv /etc/init.d/optware /etc/init.d/rc.optware
才行， 怎么都没人写这句呢？？

1.63的固件可以改吗？

本帖最后由 zjchacha 于 2012-11-14 21:04 编辑

1.63固件下，不能修改了，第一步都报错了：
Microsoft Windows [版本 6.1.7601]
版权所有 (c) 2009 Microsoft Corporation。保留所有权利。

C:\Program Files\Java\jre7\bin>java -jar acp_commander.jar -t 192.168.1.45 -ip 1
92.168.1.45 -pw 1366 -c "(echo 1366root1366;echo 1366root1366)|passwd"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 5C9D0AB12A1B
Using target:   192.168.1.45/192.168.1.45
Starting authentication procedure...
Sending Discover packet...
A SocketTimeoutException usually indicates bad firewall settings.
Check especially for *UDP* port 22936 and make sure that the connection to your
LS is working.
ERROR: Exception: SocketTimeoutException (Receive timed out) [ACP Send/Receive (
Packet:8020 = ACP_Discover)]


哦哦哦，又搞错，重新安装win7系统，防火墙忘记关了！

1.63下改机成功，Transmission BT中...

求助！！！

ls-xl，配的希捷2t的硬盘，全新插入未手工设置。
升级官方1.63。

完全根据标准流程进行，破解root密码，更改ssh root登陆，重启ssh后使用securecrt或putty无法登陆：
The remote system refused the connection.

请高人不吝赐教，谢谢！



以下是命令行的内容：

C:\Users\admin\Downloads>
C:\Users\admin\Downloads>java -jar acp_commander.jar -t 192.168.0.198 -ip 192.
168.0.198 -pw password -c "(echo toor;echo toor)|passwd"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 7B30B8719216
Using target:   192.168.0.198/192.168.0.198
Starting authentication procedure...
Sending Discover packet...
Found:  LS-XL9F9 (/192.168.0.198)       LS-XL(SHOUTOKU) (ID=00025)      mac: 4C:
E6:76:C5:89:F9  Firmware=  1.630        Key=2592E500
Trying to authenticate EnOneCmd...      ACP_STATE_OK
Trying to authenticate with admin password...   ACP_STATE_OK
>(echo toor;echo toor)|passwd
OK (ACP_STATE_OK)
Changeing IP:   ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\admin\Downloads>java -jar acp_commander.jar -t 192.168.0.198 -ip 192.
168.0.198 -pw password -c "sed -i 's/UsePAM yes/UsePAM no/g' /etc/sshd_config"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 262F1FCA71F3
Using target:   192.168.0.198/192.168.0.198
Starting authentication procedure...
Sending Discover packet...
Found:  LS-XL9F9 (/192.168.0.198)       LS-XL(SHOUTOKU) (ID=00025)      mac: 4C:
E6:76:C5:89:F9  Firmware=  1.630        Key=717C3846
Trying to authenticate EnOneCmd...      ACP_STATE_OK
Trying to authenticate with admin password...   ACP_STATE_OK
>sed -i 's/UsePAM yes/UsePAM no/g' /etc/sshd_config
OK (ACP_STATE_OK)
Changeing IP:   ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\admin\Downloads>java -jar acp_commander.jar -t 192.168.0.198 -ip 192.
168.0.198 -pw password -c "sed -i 's/PermitRootLogin no/PermitRootLogin yes/g' /
etc/sshd_config"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 4A647EFFA996
Using target:   192.168.0.198/192.168.0.198
Starting authentication procedure...
Sending Discover packet...
Found:  LS-XL9F9 (/192.168.0.198)       LS-XL(SHOUTOKU) (ID=00025)      mac: 4C:
E6:76:C5:89:F9  Firmware=  1.630        Key=349713D4
Trying to authenticate EnOneCmd...      ACP_STATE_OK
Trying to authenticate with admin password...   ACP_STATE_OK
>sed -i 's/PermitRootLogin no/PermitRootLogin yes/g' /etc/sshd_config
OK (ACP_STATE_OK)
Changeing IP:   ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\admin\Downloads>java -jar acp_commander.jar -t 192.168.0.198 -ip 192.
168.0.198 -pw password -c "/etc/init.d/sshd.sh restart"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 4B9E0E730008
Using target:   192.168.0.198/192.168.0.198
Starting authentication procedure...
Sending Discover packet...
Found:  LS-XL9F9 (/192.168.0.198)       LS-XL(SHOUTOKU) (ID=00025)      mac: 4C:
E6:76:C5:89:F9  Firmware=  1.630        Key=76000812
Trying to authenticate EnOneCmd...      ACP_STATE_OK
Trying to authenticate with admin password...   ACP_STATE_OK
>/etc/init.d/sshd.sh restart
OK (ACP_STATE_OK)
Changeing IP:   ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\admin\Downloads>

楼主，你很强，我用的1.63官方固件，起先也是按照原nfs教程做的，但是不成功，nfs启动不了，看了你的nfs部分，希望能成功，先谢谢

本帖最后由 pt880 于 2012-11-18 11:22 编辑


你这种情况只能慢慢找原因了。q我，631274160   然后远程协助吧，我来帮你弄！

LZ，我做到这一步
iv)    重启 ssh  服务：
java -jar acp_commander.jar -t 192.168.1.10 -ip 192.168.1.10 -pw adminpasswordhere -c "/etc/init.d/sshd.sh restart"
出现如图的结果，应该是ssh服务没有启动吧？

一开始我没有管他，顺着后面的步骤装了PT，但是用9091的端口启动不了，请问是不是ssh服务没启动的原因？我的设置出了什么问题呢？

求解，谢谢！

汇报一下结果，1.63官方固件，raid，非raid，均能改机，均能装transmission，但是nfs不行，在非raid下还装了aria2（raid没试），实现了nas离线下载迅雷

我就是改完了，问什么老式提示用户名和密码不对呢

为什么我的修改密码改不了呢，acp_state_password_error

有待好好学习