扫描二维码关注官方公众号
返回列表 发布新帖

[ROM/套件] 12月12日凌晨2点的V2.2新版XPEnology 设置工具&引导DSM 6.0.2-8451

 火...
62684 841
发表于 2016-12-12 14:32:38 | 查看全部 阅读模式

来吧兄弟,一起玩一起讨论!

您需要 登录 才可以下载或查看,没有账号?注册

×
本帖最后由 fyjsy 于 2016-12-13 10:54 编辑

12月12日凌晨2点的新版XPEnology 设置工具&引导文件-DSM 6.0.2-8451  不过貌似2.3快出来了。原帖地址

01.png
Main Features:








    1. Quick Setup – Automatically selects a random MAC Address, Serial Number and assists setting vid/pid of USB Stick
    2. List current IP Address of eth0
    3. Get new DHCP lease
    4. Set Static IP Adress
    5. Set MAC Address either randomly or by input
    6. Set Serial Number either randomly or by input
    7. Set vid/pid for USB boot stick
    8. Set SATA Port Mapping
    9. Set number of Network Interfaces
    10. Set max number of disks
    11. List attached disks
    12. Enable/Disable Synology Hybrid Raid (SHR) enabled by default
    13. Enable/Disable tty service (no serial port)
    14. Start SSH Service (This is without PAM, so need to use PUB KEYs)
    15. Stop SSH Service
    16. Start Telnet Service
    17. Stop Telnet Service
    18. Update XPEnology Ramdisk/Drivers/Kernel
    19. Update XPEnology Configuration Tool
    20. Troubleshoot System
    21. Reboot
    22. Poweroff
    23. Exit to shell

02.png
Troubleshooting Features:








    1. List attached disks
    2. fdisk -l
    3. sfdisk -l
    4. parted -l
    5. cat /proc/partitions
    6. cat /proc/mdstat
    7. mdadm –detail /dev/md0
    8. mdadm –detail /dev/mdX (any volume)
    9. fsck.vfat -y boot disk
    10. fsck.ext4 -y /dev/md0 (this will fsck the root volume)
    11. fsck.ext4 -y /dev/mdX (this will fsck your data volume)
    12. blkid
    13. lsblk
    14. lscpu
    15. lsmod
    16. lspci
    17. lsusb
    18. less /var/log/messages
    19. tail -f /var/log/messages (useful to run before/during install)
    20. Return to Main Menu
    21. Reboot
    22. Poweroff
    23. Exit to shell








注意几点


1、You do not need to modify grub.cfg directly. However, if you do, ONLY MODIFY GRUB.CFG!
IF YOU MESS WITH ANY OTHER FILES YOU ARE ON YOUR OWN! YOU WILL NOT BE SUPPORTED!





2、Unless you have serial console, you will see nothing past "Booting the kernel."





3、Set max number of disks
Checking root partition

max disks currently set to: maxdisks="12"
internalportcfg currently set to: internalportcfg="0xfff"
esataportcfg currently set to: esataportcfg="0xff000"
usbportcfg currently set to: usbportcfg="0x300000"

Would you like change the number of supported disks? [y/n]: y

Synology's configuration for how many disks it can see is kept in /etc.defaults/synoinfo.conf

There are four values that determine how many disks are available: maxdisks, internalportcfg, esataportcfg and usbportcfg.
These values are read in their respective order!
Notice that maxdisks is the number of drives, and the other three values are in hex format.
These are Synology's default values.

maxdisks=12
internalportcfg=”0xfff” <<< (12 Internal Drive Ports)
esataportcfg=”0xff000” <<< (8 E-SATA Ports)
usbportcfg=0x300000 <<< (3 USB Ports)

Converting the default values into binary looks like this. Notice that none of the bits overlap! And each 1=1 drive/device.

0000 0000 0000 0000 0000 0000 0000 0000 0000 1111 1111 1111 <Internal
0000 0000 0000 0000 0000 0000 0000 1111 1111 0000 0000 0000 <E-SATA
0000 0000 0000 0000 0000 0000 0111 0000 0000 0000 0000 0000 <USB

Let's change the maximum number of supported drives
Enter a new numerical value for maxdisks (4-64) 24
Enter a new hex value for internalportcfg (looks like 0xfff) 0xffffffff
Enter a new hex value for esataportcfg (looks like 0xff000) 0x000000000
Enter a new hex value for usbportcfg (looks like 0x300000) 0x3000000000

Your new configuration will be the following:
maxdisks=24
internalportcfg=0xffffffff
esataportcfg=0x000000000
usbportcfg=0x3000000000

Would you like change the number of supported disks with the values above? [y/n]: y
Setting new number of supported disks to 24.

maxdisks is now set to maxdisks="24"
internalportcfg is now set to internalportcfg="0xffffffff"
esataportcfg is now set to esataportcfg="0x000000000"
usbportcfg is now set to usbportcfg="0x300000000"





4、 Start SSH Service (Must use included Private RSA Key)
Would you like to start ssh service? [y/n]: y
Starting sshd service.
sshd service is running with pid 9146

You must copy the text below into ~/.ssh/id_rsa in order to connect via ssh.
Make sure you chmod 600 ~/.ssh/id_rsa
==================== id_rsa ========================
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
====================================================





5、如果你用XPEnology Configuration Tool设置了MAC、SN等参数,是不需要再去改GRUB.CFG文件的










Supported Drivers

1、 Network Drivers
AMD
amd8111e : AMD 8111 (new PCI LANCE)
pcnet32 : AMD PCnet32 PCI

Asix
asix : ASIX AX88xxx Based USB 2.0 Ethernet Adapters
ax88179_178a : ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet

Atheros / Qualcomm
atl1 : Atheros/Attansic L1 Gigabit Ethernet
atl1c : Atheros L1C Gigabit Ethernet
atl1e : Atheros L1E Gigabit Ethernet
atl2 : Atheros L2 Fast Ethernet
alx : Qualcomm Atheros AR816x/AR817x

Broadcom
b44 : Broadcom 440x/47xx
bnx2 : Broadcom NetXtremeII BCM5706/BCM5708/5709/5716
bnx2x : Broadcom NetXtremeII 10Gb BCM57710/BCM57711/BCM57711E/BCM57712
tg3 : Broadcom Tigon3 BCM5705/BCM5703/BCM5702/BCM5701/BCM5700/BCM5721/BCM5751/BCM5788/BCM5704/BCM5752/BCM5789
tg3 : BCM5723/BCM5761/BCM5787/BCM5755/BCM5722/BCM5754/BCM57781/BCM57785/BCM5718BCM57765/BCM57761
tg3 : BCM5719/BCM5725/BCM5762/BCM5720/BCM57790/BCM57795/BCM57766/BCM57780

Chelsio
cxgb : Chelsio 10Gb Ethernet
cxgb3 : Chelsio Communications T3 10Gb
cxgb4 : Chelsio Communications T4 Ethernet

Cisco
enic : Cisco VIC Ethernet NIC

D-Link
dl2k : D-Link DL2000-based Gigabit Ethernet Adapter

HP
hp100 : HP 10/100VG PCLAN (ISA, EISA, PCI)

Intel
e100 : Intel PRO/100+
e1000 : Intel PRO/1000 CT/F/GT/MF/MT/T/XF/XT 82543GC/82546EB/82545EM/82540EM/82540EP/82544GC/82544EI/82547EI/82541EI
e1000 : 82545GM/82546GB/82541ER/82547GI/82541GI/82541PI/82566MM/82566MC/82566DM/82566DC/82563EB/82564EB/82562
e1000e : 82573L/82572EI/82571EB/82573E/82573V/82567/82574L/82566MM/82566MC
e1000e : 82566DM/82566DC/82563EB/82574IT/82583V/82579LM/82579V/82577LC/82577LM
e1000e : 82578DC/82578DM/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/V
igb : 82576EB/82576NS/82580EB/82575EB/Gigabit ET/ET2/EF/VT
igb : I350-AM4/I350-BT2/I350-AM2/I350-T2/I350-T4/I350-F2/I350-F4
igb : I340-F4I340-T4/I210-AT/I210-IS/I210-IT/I210-T1/I210-AS/I210-CS
ixgbe : Intel 10 Gigabit AF DA/AT/AT2/CX4/XF LR/XR/82599EB/82598EB/82599ES/82599EN
ixgbe : X540-T1/X540-T2/540-AT2/X520-SR1/X520-SR2/X520-DA2/X520-LR1/X520-DA1/X520-DA4/X520-QDA1/X520-T2 X550-BT2/AT/AT2 X550-T1/T2
i40e : Intel 40 Gigabit X710-AM2/XL710-AM1/XL710-AM2/X710-DA2/X710-DA4/XL710-QDA1/XL710-QDA2

JMicron
jme : JMicron(R) PCI-Express Gigabit

Marvell
skge : Marvell Yukon Gigabit Ethernet
sky2 : Marvell Yukon 2 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21

Mellanox
mlx4_en : Mellanox Technologies 10Gbit Ethernet

NVIDIA
forcedeth : nForce Ethernet

Brocade/QLogic
bna : Brocade 1010/1020 10Gb Ethernet
qla3xxx : QLogic QLA3XXX Network Driver
qlcnic : QLOGIC QLCNIC 1/10Gb Converged Ethernet
qlge : QLogic QLGE 10Gb Ethernet

pegasus : Pegasus/Pegasus II USB Ethernet driver

pch_gbe : EG20T PCH Gigabit ethernet Driver

Realtek
r8101 : RTL8100E/RTL8101E/RTL8102E-GR/RTL8103E(L) RTL8102E(L)/RTL8101E/RTL8103T RTL8401/RTL8401P/RTL8105E RTL8402/RTL8106E/RTL8106EUS
r8168 : RTL8111B/RTL8168B/RTL8111/RTL8168 RTL8111C/RTL8111CP/RTL8111D(L) RTL8168C/RTL8111DP/RTL8111E
r8168 : RTL8168E/RTL8111F/RTL8411 RTL8111G/RTL8111GUS/RTL8411B(N) RTL8118AS
r8169 : RTL8110SC(L) RTL8110S/RTL8110SB(L)/RTL8169SB(L)/RTL8169S(L)/RTL8169
r8150 : USB RTL8150 based Ethernet device
r8152 : RTL8152/RTL8153 Based USB 2.0/3.0 Ethernet Adapters
rtl8150 : USB RTL8150 Based USB Ethernet Adapter

SiS
sis900 : SiS 900/7016
sis190 : SiS190/SiS191

VIA
via-rhine : VIA Rhine
via-velocity : VIA Velocity

Virtio
virtio_net : Virtio network driver

VMware
vmxnet3 : VMware VMXNET3 ethernet driver

sc92031 : Silan SC92031 PCI Fast Ethernet Adapter driver




3、SCSI/SAS Storage Drivers
3ware
3w-xxxx: 3ware 5/6/7/8xxx ATA-RAID support
3w-9xxx : 3ware 9xxx SATA-RAID support
3w-sas: 3ware 97xx SAS/SATA-RAID support

Adaptec
aacraid : Adaptec AACRAID support (Dell PERC2, 2/Si, 3/Si, 3/Di, HP NetRAID-4M, IBM ServeRAID & ICP SCSI), HBA 1000 series
aic94xx : Adaptec AIC94xx SAS/SATA support

HighPoint
hptiop : HighPoint RocketRAID 3xxx/4xxx Controller support

HP
hpsa : Smart Array P212 P410 P410i P411 P812 P712m P711m ; (Gen6/7 Controllers)
hpsa : Smart Array P222 P420 P420i P421 P822 P220i P721 ; (Gen8 Controllers)
hpsa : Smart Array P430 P430i P431 P830 P830i P831 P731m P230i P530 P531 ; (Gen8.5 Controllers)
hpsa : Smart Array P440 P441 P840 P440ar P244br H240 H241 H240ar H244br ; (Gen9 Controllers)
hpsa : HP StorageWorks 1210m P1224 P1228 P1228m P1224e P1228e P1228em

IBM
ips : IBM ServeRAID support

Intel
gdth : Intel/ICO RAID controller support
isci : Intel C600 Series Chipset SAS Controller

Initio
Initio 9100U(W) support
a100u2w Initio INI-A100U2W support

stex : Promise SuperTrak EX Series support

SYM53C8XX Version 2 SCSI Support
IBM Power Linux RAID adapter support

QLogic
QLogic QLA 1240/1x80/1x160 SCSI support

LSI
megaraid_sas : MegaRAID SAS 9361-8i/9361-4i9341-8i/9341-4i/9380-8e/9380-4i4e/9270-8i9271-4i/9271-8i/9271-8iCC
megaraid_sas : 9286-8e/9286CV-8e/9286CV-8eCC/9265-8i/9285-8e/9240-4i/9240-8i/9260-4i/9260CV-4i/9260-8i/9260CV-8i
megaraid_sas : 9260DE-8i/9261-8i/9280-4i4e/9280-8e/9280DE-8e/9280-24i4e/9280-16i4e/9260-16i/9266-4i/9266-8i/9285CV-8e
mpt2sas : LSI SAS 6Gb/s Host Adapters SAS2004, SAS2008, SAS2108, SAS2116, SAS2208, SAS2308 and SSS6200
mpt3sas : LSI SAS 12Gb/s Host Adapters SAS3004, SAS3008, SAS3108

Marvell
mvsas : Marvell 88SE64XX/88SE94XX SAS/SATA support (SAS/SATA 3Gb/s PCI-E 88SE64XX and 6Gb/s PCI-E 88SE94XX)


3、SATA Storage Drivers
Intel
ata_piix : Intel ICH5/6/7/8/9/10 SATA support and Intel ESB/ICH/PIIX3/PIIX4 PATA support

Marvell
sata_mv : Marvell Serial ATA 88SX[56]0[48][01] PCI(-X), [67]042 PCI-X/PCIe and SOC devices.

NVIDIA
sata_nv : NVIDIA SATA support

Promise
sata_sx4 : Promise SATA SX4 support
sata_promise : Promise Serial ATA TX2/TX4

ServerWorks
sata_svw : ServerWorks Frodo / Broadcom/ Apple K2 SATA support

Silicon Image
sata_sil24 : Silicon Image 3124/3132 SATA support
sata_sil : Silicon Image SATA support

SiS
sata_sis : SiS SATA 964/965/966/180 and PATA 180 support

ULi
sata_uli : ULi Electronics SATA support

VIA
sata_via : VIA SATA support

Vitesse
sata_vsc : VITESSE VSC-7174 / INTEL 31244 SATA support


4、PATA Storage Drivers
AMD/Nvidia
pata_amd : support for the AMD and NVidia PATA interfaces

JMicron
pata_jmicron : JMicron IDE controller support

SiS
pata_sis : SiS PATA support

VIA
pata_via : VIA PATA support


5、 Media/DVB Drivers
backports_dvb/atbm8830.ko
backports_dvb/btcx-risc.ko
backports_dvb/cs53l32a.ko
backports_dvb/cx22700.ko
backports_dvb/cx22702.ko
backports_dvb/cx2341x.ko
backports_dvb/cx23885.ko
backports_dvb/cx24116.ko
backports_dvb/cx24123.ko
backports_dvb/cx25840.ko
backports_dvb/cx88-alsa.ko
backports_dvb/cx88-blackbird.ko
backports_dvb/cx88-dvb-core.ko
backports_dvb/cx88-vp3054-i2c.ko
backports_dvb/cx8800.ko
backports_dvb/cx8802.ko
backports_dvb/cx88xx.ko
backports_dvb/cxd2820r.ko
backports_dvb/dib0070.ko
backports_dvb/dib3000mc.ko
backports_dvb/dib7000p.ko
backports_dvb/dibx000_common.ko
backports_dvb/drxd.ko
backports_dvb/drxk.ko
backports_dvb/ds3000.ko
backports_dvb/dvb-core.ko
backports_dvb/dvb-pll.ko
backports_dvb/dvb-ttusb-budget.ko
backports_dvb/dvb-usb-cinergyT2.ko
backports_dvb/dvb-usb-cxusb.ko
backports_dvb/dvb-usb-nova-t-usb2.ko
backports_dvb/dvb-usb-technisat-usb2.ko
backports_dvb/dvb-usb.ko
backports_dvb/em28xx-alsa.ko
backports_dvb/em28xx-dvb.ko
backports_dvb/em28xx.ko
backports_dvb/hdpvr.ko
backports_dvb/ir-jvc-decoder.ko
backports_dvb/ir-kbd-i2c.ko
backports_dvb/ir-lirc-codec.ko
backports_dvb/ir-mce_kbd-decoder.ko
backports_dvb/ir-nec-decoder.ko
backports_dvb/ir-rc5-decoder.ko
backports_dvb/ir-rc5-sz-decoder.ko
backports_dvb/ir-rc6-decoder.ko
backports_dvb/ir-sony-decoder.ko
backports_dvb/isl6421.ko
backports_dvb/lgdt330x.ko
backports_dvb/lgs8gxx.ko
backports_dvb/lnbp21.ko
backports_dvb/max2165.ko
backports_dvb/mc44s803.ko
backports_dvb/msp3400.ko
backports_dvb/mt20xx.ko
backports_dvb/mt2131.ko
backports_dvb/mt352.ko
backports_dvb/mt9v011.ko
backports_dvb/mxl5005s.ko
backports_dvb/nxt200x.ko
backports_dvb/or51132.ko
backports_dvb/pvrusb2.ko
backports_dvb/rc-core.ko
backports_dvb/s5h1409.ko
backports_dvb/s5h1411.ko
backports_dvb/s921.ko
backports_dvb/saa7115.ko
backports_dvb/stb0899.ko
backports_dvb/stb6000.ko
backports_dvb/stb6100.ko
backports_dvb/stv0288.ko
backports_dvb/stv0297.ko
backports_dvb/stv0299.ko
backports_dvb/stv0900.ko
backports_dvb/stv090x.ko
backports_dvb/stv6110.ko
backports_dvb/stv6110x.ko
backports_dvb/tda10023.ko
backports_dvb/tda10048.ko
backports_dvb/tda1004x.ko
backports_dvb/tda18271.ko
backports_dvb/tda18271c2dd.ko
backports_dvb/tda8083.ko
backports_dvb/tda827x.ko
backports_dvb/tda8290.ko
backports_dvb/tda9887.ko
backports_dvb/tea5767.ko
backports_dvb/ttpci-eeprom.ko
backports_dvb/ttusb_dec.ko
backports_dvb/ttusbdecfe.ko
backports_dvb/tuner-simple.ko
backports_dvb/tuner-types.ko
backports_dvb/tuner-xc2028.ko
backports_dvb/tuner.ko
backports_dvb/tveeprom.ko
backports_dvb/tvp5150.ko
backports_dvb/v4l2-common.ko
backports_dvb/v4l2-compat-ioctl32.ko
backports_dvb/ves1820.ko
backports_dvb/videobuf-core.ko
backports_dvb/videobuf-dvb.ko
backports_dvb/videobuf-vmalloc.ko
backports_dvb/videodev.ko
backports_dvb/wm8775.ko
backports_dvb/xc5000.ko
backports_dvb/zl10353.ko
snd-hwdep.ko
snd-mixer-oss.ko
snd-page-alloc.ko
snd-pcm-oss.ko
snd-pcm.ko
snd-rawmidi.ko
snd-seq-device.ko
snd-seq-midi-event.ko
snd-seq-midi.ko
snd-seq.ko
snd-timer.ko
snd-usb-audio.ko
snd-usb-hiface.ko
snd-usbmidi-lib.ko
snd.ko
sound_firmware.ko
soundcore.ko



安装
Baremetal Install
  • Extract zip file on your computer
  • Use Win32DiskImage/Rufus/unetbootin/etc. to get XPEnology-DSM-6.0.2-8451.5-quicknick-boot-v2.2.img on USB media
  • Power On HW w/USB media attached
  • Find DHCP IP of VM and connect via telnet or ssh; see FAQs for more information
  • You can also use serial console/IPMI/ILO to view console
  • Login with root/password supplied from boot console
  • Configure grub.cfg with XPEnology Configuration Tool

KVM Install
  • Extract zip file on your computer
  • Create new VM in Virtual Machine Manager
  • Add USB Storage with downloaded XPEnology-DSM-6.0.2-8451.5-quicknick-boot-v2.2.img
  • Add additional SATA vDisks
  • Set Network card to e1000
  • Power On VM
  • Find DHCP IP of VM and connect via telnet or ssh; see FAQs for more information
  • You can also switch Text Console to Serial Console
  • Login with root/password supplied from boot console
  • Configure grub.cfg with XPEnology Configuration Tool

VMware ESXi/Workstation Install
  • Extract zip file on your computer
  • Import OVF into VMware
  • Add vDisks, RDM disks or PCI-E Pass-through storage controllers
  • Change Network Label to your Network
  • Power On VM
  • Find DHCP IP of VM and connect via telnet or ssh; see FAQs for more information
  • You can also login from another machine with Serial connectivity using Named Pipe //./pipe/com1
  • Login with root supplied from boot console
  • Configure grub.cfg with XPEnology Configuration Tool

下载地址 包含VMware ESXi
游客,如果您要查看本帖隐藏内容请回复








评论841

loonydLv.10 发表于 2016-12-12 14:40:16 | 查看全部
然而N54L并不能引导,也不能进入config工具
回复 点赞

使用道具 举报

cyhyfLv.10 发表于 2016-12-12 14:53:44 | 查看全部
see see~~~~~~~~~~~
回复 点赞

使用道具 举报

jackeyxxxLv.4 发表于 2016-12-12 14:55:51 | 查看全部
非常感谢分享。
回复 点赞

使用道具 举报

wenjunerLv.10 发表于 2016-12-12 15:29:11 | 查看全部
这个很需要的哦
回复 点赞

使用道具 举报

qddreamVIPLv.10 发表于 2016-12-12 15:29:23 | 查看全部
看看。不错的东西。感谢
回复 点赞

使用道具 举报

42010638订阅40℃Lv.1 发表于 2016-12-12 15:31:08 | 查看全部
看看!之前用的另外一个GRUB的启动工具
回复 点赞

使用道具 举报

tong 发表于 2016-12-12 15:34:29 | 查看全部
提示: 作者被禁止或删除 内容自动屏蔽
回复 点赞

使用道具 举报

sangziruiLv.5 发表于 2016-12-12 15:39:32 | 查看全部
厉害了我的哥
回复 点赞

使用道具 举报

walker1682000Lv.10 发表于 2016-12-12 15:40:30 | 查看全部
Thanks you very much
回复 点赞

使用道具 举报

wwjuLv.3 发表于 2016-12-12 15:41:45 | 查看全部

非常感谢分享。
回复 点赞

使用道具 举报

arms0322Lv.2 发表于 2016-12-12 15:42:49 | 查看全部
越来越强大了,支持下
回复 点赞

使用道具 举报

未接来电Lv.5 发表于 2016-12-12 15:44:25 | 查看全部
非常感谢分享。
回复 点赞

使用道具 举报

zhanglu525Lv.2 发表于 2016-12-12 15:46:01 | 查看全部
好东西  谢谢分享
回复 点赞

使用道具 举报

woshiwaxiuLv.10 发表于 2016-12-12 15:53:29 | 查看全部
非常感谢分享。
回复 点赞

使用道具 举报

cheong0hkLv.10 发表于 2016-12-12 15:55:13 | 查看全部
非常感谢分享。
回复 点赞

使用道具 举报

JureVIPLv.5 发表于 2016-12-12 15:58:32 | 查看全部
非常感谢分享。
回复 点赞

使用道具 举报

小雅Lv.10 发表于 2016-12-12 16:09:07 | 查看全部
感谢您的分享!!!
回复 点赞

使用道具 举报

19791216Lv.3 发表于 2016-12-12 16:12:08 | 查看全部
下上档次的 VC分享给人的身份证
回复 点赞

使用道具 举报

yzwcgLv.4 发表于 2016-12-12 16:14:26 | 查看全部
非常感谢分享。
回复 点赞

使用道具 举报

回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

淘宝小店

邀请码

VIP会员

微信客服

公众号

微信群

投诉/建议联系

support@gebi1.cn

未经授权禁止转载,复制和建立镜像,
如有违反,追究法律责任
  • 关注公众号
  • 添加微信客服
Copyright © 2001-2024 隔壁网 版权所有 All Rights Reserved. 粤ICP备14056481号-1
关灯 在本版发帖
扫一扫添加微信客服
返回顶部
快速回复 返回顶部 返回列表