黑群激活九代Intel核显硬解←只为大家少走弯路 |
本帖最后由 bimmer2020 于 2020-7-26 22:52 编辑
CPU:i9-9900T es 设备 ID:0x3E98 主板:华擎 Z390M-ITX/ac Loader:Jun's Loader v1.04b DSM版本:DSM 6.2.3-25426 Update 2(DS918+) -------------------------------------------------------------------------------- 1、替换Jun’s Loader v1.04b引导中的“extra/extra2”。(使用DiskGenius Pro替换) 2、将“918plus_dsm623u2_i915_mod.zip”中的“3E98/i915.ko”替换到“/usr/lib/modules/”。(注意根据自己处理器核显设备ID选择对应模块) 3、重启生效。 -------------------------------------------------------------------------------- 完美激活硬解,Intel I219V也能正常识别使用。原帖地址:https://xpenology.com/forum/topic/28321-driver-extension-jun-103b104b-for-dsm623-for-918-3615xs-3617xs/ 8086:3E98 => iGPU UHD 630, High End Desktop 9 Series (i5-9400, i5-9600k, i7-9700t, i7-9700) 8086:9BC8 => iGPU UHD 630, Low End Desktop i5 10500 and lower 8086:9BC5 => iGPU UHD 630, High End Desktop i5 10600K and higher the zip file contains 3 versions in every one is 3E92 replaced with the one we want to get working, as its just a crude binary patch i choose 3E92 as it seemed the most similar device, was tested for 3E98 iGPU and seemed to work, for the 10th gen cpu's it's yet untested but i made the patch anyway so if someone has access to a 10th gen desktop cpu please try it and post your findings here (like devices in /dev/dri present and transcoding working or not) same as above but for the new driver in 6.2.3 Update2 extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.3 scsi/sas disks will have no s.m.a.r.t. infos (see edit2 above), newer atlantic.ko driver 2.3.4, r8125 added to rc.modules, used latest source for realtek drivers r8101/r8125/r8152/r8168/r8169, bna.ko firmware corrected
|
厉害啊,感谢楼主分享,现在用的unraid,不过这个系统在docker下下载torrent的时候负载偏高
|
腾空滴猪 发表于 2020-7-28 12:33 木有测试条件啊 没十代处理器 你可以试试,替换的时候先把原i915.ko和引导里的extra.lzma/extra2.lzma备份一下,不行就恢复呗 |
bimmer2020 发表于 2020-7-28 15:23 我的是10700的CPU 这种技术活看都看不懂呢 哈哈 要不楼主给个远程下做个试验 能替换么最好 不能替换么 我就换回9代主板 |
腾空滴猪 发表于 2020-8-4 00:15 应该是可以的 可以先去Intel查查你的设备ID号 |
str007 发表于 2020-7-30 11:18 8代U好像不用打补丁就可以开启硬解吧 |
本帖最后由 盈泪诗篇 于 2020-8-7 11:31 编辑
10代U 打补丁后出现card0和renderd128但是emby内没有识别出解码 |