DIY NAS之我的群辉计划--已成功 提供教程与软件--更新4.2-3202

学习学习。

感谢楼主

好东西啊

不错，这个可以顶起。

HDD 休眠有没有测试过？？？

貌似休眠无效啊…………

必看，歇息饿了

学习了。。。

学习中，要怎么才能装到U盘

感谢分享。。。。。。。。。。。。

这都有了啊 看看 顶起

多谢分享，感谢~

得不得啊

期待楼主的教程

{:3_46:}看看国人的智慧！

好东西啊！要支持！

哈哈哈哈哈哈

支持，顺便打开隐藏~~~

牛淫呀。。。。。。。

georgefan101 发表于 2013-3-31 12:36

                               
登录/注册后可看大图

Q1
问题出在网卡上。
4.1支持的网卡多。

通过翻字典理解外国人的教程，发现问题所在，已经解决了，谢谢哈
The How-To(for REAL Hardware):

1. Extract 'DS3612xs_2668_4.1%2B%2B.7z' using 7-zip. You'll have three files.
-DSM_DS3612xs_2668.pat, DSM installation file
-SynoBoot_3612xs_4.1++.img , bootloader image (needed if youll be testing on REAL hardware)
-SynoBoot_3612xs_4.1++.vdi, VirtualBox virtual disk file(needed if youll be testing on VM )

2. Extract 'win32diskimager-binary06.rar'. Insert your USB flash drive and launch W32DiskImager.
-Load the .IMG file from STEP1 and choose your USB drive from the drop down list.
-Click Write and WAIT for complete.

Pre-Prep your PC:
-Set BIOS to boot from USB
-WIPE SATA disk youll be using, then connect to 'SATA_0' port on your motherboard
-Connect to network switch(DHCP Required)

3. Insert USB into PC and power it ON. If you have a console(KVM) attached to the PC youll see machine coming up.

4. Launch Synology Assistant from your Windows workstation and click 'Search'. If you've done everything correctly you'll see a new 'DiskStation' has been found.

-- IMPORTANT -- Disconnect the USB flash drive from the computer for this next step.

5. Right-click the new 'DiskStation' and choose 'Install'. Browse and select the 'DSM_DS3612xs_2668.pat' file. Choose a Name for the DiskStation, a new default admin password and IP configuration. After installation is complete the DiskStation will reboot automatically. Power it OFF manually now.

-- INSERT USB Flash drive back into PC --

6. Power on PC. DSM will boot normally. Back to Synology Assistant click 'Search' again. Depending on the name and network config you chose during installation you will see now see a DiskStation has been found with the NAME you chose. The previous Installation Progress bar will show 100% complete and you can now access your DiskStation by opening a browser and pointing to the IP its configured with.

正是想要的。谢谢。