【5.28更新v1.1_beta8】4.3 3827资源整合

    5.28更新   XPEnology_3827已更新至XPEnology_3827-pre-v1.1_beta8 ，此版能获取真实mac地址。直接用此版的朋友就不需要再修改mac地址了。下载地址XPEnology_3827-pre-v1.1_beta8

   从4.3 3810到5.0 4458反复几次，最终回到4.3 3827.此版本启动速度快，个人感觉最好用。现将坛子里优秀资源集中在此，方便自己同时也方便有需要的朋友。
  本帖软件版本基于xpenology论坛Trantor的 XPEnology_3827-pre-v1.1_beta7，驱动自己看。

v8 (11/05/2014)

- Use real mac adresses (thx gnotboot for the tip)
- 3827 update2 is not installed but included and patched*

- Add Marvell 9230 chip support (dawicontroller, thx Symbiot78)
- Add VIA Velocity network support
- Add sound support
- Add bluetooth support
- Add wifi drivers (backport all drivers from kernel 3.12.1)
- Add multimedia dvb drivers (include all drivers available in kernel sources as module)
- Add a second kernel with pata_legacy built-in driver
- Update e1000e driver to v3.0.4
- Update r8168 driver to v8.038
- Update mpt2sas driver to v18

* Included Update2 will only work if you make a new install and disable volume creation in Syno Assistant.
Otherwise just follow the how to provided above.
I will make a patch to prevent this in the future.

v7 (24/02/2014)

- Update to 4.3-3827 build
- Synology DX510 is properly detected
- Temporarily removed pata_legacy

v6 (09/02/2014)

- Fix grub error 17 (introduced in beta5)
- Add Mellanox Technologies 10Gbit Ethernet support
- Add QLOGIC QLCNIC 1/10Gb Converged Ethernet support
- Add RocketRAID 2640x4 support (rr26xx driver)

v5 (20/01/2014)

- Add VIA CPU support (CENTAUR)
- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)
- Add Brocade 1010/1020 10Gb support
- iSCSI (block level) works in IET mode (change lio to iet in synoinfo.cfg)
- iSCSI (regular) works in LIO mode
- NFS working
- CIFS mount point working
- Include bootstrap ipkg setup script (/root.profile is already modified) : after setup just log to ssh and type :
sh syno-i686-bootstrap_1.2-7_i686.xsh
reboot, log again to ssh and type
ipkg update


v4 (29/12/2013)

- You can now install DSM on drives connected to a SCSI/SAS controller
- Fix the volume "broken" issue when DSM is installed on a SCSI/SAS controller
- Fix NFS support
- Update megaraid_sas driver to the latest version
- Modify the way XPEnology's modules are loaded in ramdisk
- Include modules from previous beta
- Add PS2 keyboard support

v3 (21/12/2013)

- Add more drivers for KVM / virtio / virtualization support
- Add patched r8169 driver (realtek chips which are not working with the r8168 driver will work with this one)
- Add latest version of sk98lin driver (Marvell Yukon / SysKonnect SK-98xx/SK-95xx support)
- Update Broadcom bnx2 driver to latest version


v2 (05/12/2013)

- AX88179 Gigabit Ethernet USB 3.0
- Latest driver version for RocketRAID 3xxx/4xxx Controller
- Latest (aacraid) driver version for Adaptec
- Support XFS filesystem (no idea if DSM will automount this)


v1

- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)


SCSI
----

Highpoint Rocketraid 2720SGL
LSI mpt2sas v17
Adaptec aacraid
Intel C600 Series Chipset SAS


NETWORK
-------

3Com 3c590/3c900, 3cr990
Alteon AceNIC/3Com 3C985/NetGear GA620
QLogic QLA3XXX
SiS 900/7016 SiS190/SiS191


USB
---

USB to serial / Prolific 2303 driver


PATA
----

ATI PATA (PATA_ATIIXP)
AMD/NVidia PATA (PATA_AMD)
CMD64x PATA (PATA_CMD64X)
JMicron PATA (PATA_JMICRON)
Marvell PATA (PATA_MARVELL)
Promise PATA 2027x (PATA_PDC2027X)
Intel SCH PATA (PATA_SCH)
CMD / Silicon Image 680 PATA (PATA_SIL680)
SiS PATA (PATA_SIS)
VIA PATA (PATA_VIA)
Winbond SL82C105 PATA (PATA_WINBOND)
Legacy PATA support (PATA_LEGACY)

下载地址：XPEnology_3827-pre-v1.1_beta7(此链接已更新为beta8,第一步可以省略了）
   1:用img mac editor(sancome出品)打开synoboot-3827-pre-v1.1_v7.img修改成本机mac ,序列号看个人需要。



  2:  5.0无损降级（有风险），全新安装请无视。步骤nas开启ssh,  用WinSCP连接nas,修改/etc.defaults/VERSION这个文件
    档案内容如下：
majorversion="5"
minorversion="0"
buildphase="release"
buildnumber="4458"
smallfixnumber=2
builddate=2014/04/03
     把5改成2  4458改成1000保存

   进nas,查看系统信息，如果版本号变成修改后的就成功了。nas关机，把第一步修改好的映像文件用 win32diskimager写入启动u盘。
   3：安装4.3系统。 nas开机，此步为网页安装。浏览器打开nas ip,不出意外会提示有转移，选择只保留我的文件，全新安装。选择第一步XPEnology_3827-pre-v1.1_beta7压缩包里的beta7.pat确定，安装完成。   
   4：安装video station套件。下载video station 1.2-0423，此版本为官方最后一个原生支持ac3和dts解码。且cpu占用小。打开套件中心，手动安装。官方下载：video station 1.2-0423
   
   5：系统更新至update 2.打开系统更新，发现状态栏为：dsm 5.0-4482版本可下载。所以手动下载+计划任务更新行不通了。就只能手动更新了。一定要严格按步骤来，错一步就会报错。
             ①：下载update2升级包

游客，如果您要查看本帖隐藏内容请回复

             ②：更新面板里面选择手动更新，浏览文件，确定，这时候千万别下一步。                        
             ③：打开ssh和telnet,win7 cmd连接.依次输入两条命令：
                          

1. sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1

复制代码

1. mv /autoupd@te.info1 /autoupd@te.info

复制代码

             ④：系统更新里，点下一步。完成。







     6:修改XPEnology 4.3 logo。（可选)                                      原精华帖 修改XPEnology_4.3登录界面XPEnology 4.3 logo的方法 （_爱仩钌伱）
             原作中使用的是命令方式，这里我们使用上面已经下载的winscp
             下载原版的logo文件夹(注意，解压后有两层目录，我们用到的是最里面的login文件夹）
              winscp连接nas,将下载的login文件夹覆盖/usr/syno/synoman/webman/resources/images/

暂时就这样，不足之处还请指正

支持一个······

不错期待

谢谢分享！

努力学习，天天向上，感谢分享

学习一下了

剩下的还没出来？

路过学习了，谢谢分享

学习一下了

谢谢楼主分享。

非常好 的帖子啊

谢谢分享

支持啊，订起来

路过看看。

在等beta8！

谢谢分享

Venue 11 Pro

谢谢分享！

jjjjjjjjjjjjjjjjjjjjjjjjj